Atlas Aval ZW 330 Basecoat

ATLAS ZW 330 is intended for repairing, levelling and filling building substrates inside and outside buildings. It can be used on both walls and floors, with a layer thickness of 3 to 50 mm.

The range of applications includes, among others:
- filling cavities and levelling uneven surfaces,
- rebuilding and repairing corners of walls, columns, beams, stair edges, landings and platforms, balconies,
- filling grooves after removed or installed installations (in walls and floors), also in the area of point and linear drains and linear drains,
- full-surface levelling of walls - including multi-layer rendering with a layer thickness of up to 5 cm (single layer thickness up to 3 cm), with render class II or III,
- execution of reinforced repair layers strengthened with fibreglass mesh,
- repair and profiling of window reveals (e.g. when replacing joinery),
- filling and repairing existing cement floors, reprofiling their slopes,
- shaping of facets and corners,
- replenishing render coatings, levelling surfaces,
- shaping slopes in the area of linear drains, on balconies, terraces, in shower cubicles, installing drains,
- filling in walls at installation passages through building walls.
- base coat for thin-coat and decorative renders; suitable for embedding reinforcing mesh in render-only systems (over masonry substrates)

Execution of floor screeds bonded to the substrate.

Types of substrates repaired – cement and cement-lime plasters, concrete and reinforced concrete, aerated concrete, cement screeds, as well as unrendered brick and ceramic or silicate block walls.

Type of finishing layer – ceramic tile cladding, smooth finishes, thin-coat renders, floor panels, etc.